SkyEcho includes FLARM and ADS-B receivers to receive position reports from other equipped aircraft and display them on in-flight applications, including ForeFlight Mobile, SkyDemon, EasyVFR and Airmate.
See and Be Seen
UK CAA CAP-1391 allows light aircraft, gliders and balloons to see and be seen by other aircraft without equipping a traditional transponder.
Portable ADS-B
SkyEcho 2 is a portable ADS-B receive and transmit solution. With 20W transmit power, your 1090MHz ADS-B signal can be received up to 40NM away. Transmit functionality can be enabled or disabled depending on your flight location. The ADS-B receiver capability includes both 1090MHz and 978MHz UAT. Portable ADS-B transmit capability is currently only approved for use in the United Kingdom under CAP1391.
FLARM Reception Capability
Receive FLARM in the UK/EU natively with SkyEcho 2. When selected by the user, the UAT radio in SkyEcho 2 can be used as a FLARM receiver. FLARM traffic data is transmitted to participating EFB applications for display of FLARM traffic. SkyEcho 2 will translate the FLARM data onto your compatible EFB along with the ADS-B traffic.
Be Trusted with Certified GPS
SkyEcho 2 includes a TSO-C199 GPS transmitting a Source Integrity Level (SIL) value of 1. SIL values of one (1) enable certified avionics, TCAS, and ATC to process and display your aircraft position. Aircraft using uncertified sources transmitting SIL of zero (0) are typically discarded and not displayed by the avionics or ATC displays. The high-integrity, SBAS GPS with Fault Detection and Exclusion (FDE) also provides position data to the EFB application and correlates your position with received traffic for viewing on supported displays.
Integrated Altimeter
SkyEcho 2 includes an integrated baro altimeter. The altimeter correlates cabin pressure altitude to altitudes of nearby traffic to give you more accurate relative altitude alerts.
No Clutter Cockpit
The integrated SkyEcho 2 battery removes cords and clutter from the cockpit and has enough capacity for up to 12 hours of flight time with the transmit function enabled.
Connect wirelessly to SkyEcho and receive live traffic on your GDL90 compatible EFB or EFIS for up to 4 devices simultaneously.
| Specification |
Value |
| Operating Time |
12 hours |
| Operating Power |
3 watts |
| Size |
57x82x30mm |
| Weight |
120 grams |
| SDA/SIL |
1/0 (TSO-C199 GPS) |
| Operating Temp |
-45 to 70°C |
| Transmitter |
| Frequency |
1090MHz ±1MHz |
| Transmit Power |
20W Nominal |
| Frequency |
DO-260B DF-18 |
| Receiver |
| 1090 Performance |
-93 to 0dBm |
| 978 Performance |
-103 to 0dBm |
| WAAS GPS |
|
| Augmentation |
SBAS |
| Sensitivity |
-167dBm |
| Altimeter |
| Range |
-1000 to 60,000ft |
| Interfaces |
| Wi-Fi |
802.11 b/g/n 2.4GHz
4 simultaneous Connections |
| Ports |
USB-C |
– Download the user and installation guide by clicking here –
Please note: The SkyEcho 2 is currently approved for use as an ADS-B out device in the U.K. under the innovative CAP 1391 program. Sale of to and use of SkyEcho in and the United States is prohibited by the FCC and FAA.
*PLEASE NOTE: ONLY AVAILABLE TO SELL IN UK AND EUROPE*.
Warranty: 2 years from purchase
