FunnelCap with bottle fitting

Open half-used oil containers can be stored in the storage room or aircraft without risk of oil leaking out. The flex hose clip ensures a tight seal of the flex hose to the cap stud, and also secures the flex hose to the can to minimise storage space when not in use. The red cap seals the flex hose and ensures a tight seal of the flex hose end.

More flex hoses can be connected to increase the reach. The flex hose can be removed if desired. The red flex hose cap is then installed on the cover stud and seals to avoid leakage and FOD.

• Install the FunnelCap with bottle fittings on top of the oil container with slight hand pressure.
• Put the end of the FunnelCap flex hose into the oil filler opening.
• Pour oil from the oil can with the flex hose at top of horizontal held oil container. This ensures air to vent the oil can.
• While pouring oil rotate the oil container slowly until the flex hose is at bottom position.
• When the oil container is empty, or the appropriate amount of oil is ensured, install the red strap cap on the end of the flex hose.
• Leave the FunnelCap installed on the empty container as this ensures no contamination with FOD of the FunnelCap and also shows which type of oil residue is in the FunnelCap.